Safety Products - Personal Protective Equipment For Sale | Caliber Tooling - (24217 Products)
Brand: U-Mark / Part #: 10857
Item #: 87272738
Brand: U-Mark
Model #: 10857Product Specifications
Tip Shape
Bullet; Chisel
Ink Type
Xylene-free; Water Base; Fade Resistant; Water Resistant
Tip Type
Reversible; Bullet; Chisel
For Use On
Wood; Glass; Cardboard; Plastic; Metal; Rubber; Textiles
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: U-Mark / Part #: 13008
Item #: 76987072
Brand: U-Mark
Model #: 13008Product Specifications
Tip Shape
Bullet; Chisel
Ink Type
Oil Base
Tip Type
Reversible; Bullet; Chisel
For Use On
Dry or Damp Wood; Tape; Glass; Rusty and Oily Metal; Wax Cartons; Ceramic; Tile; Plastic; Concrete; Rubber; Carboard
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
28 CARB TWIST DRILL AlTiN
Item #: MW23450301405B
Brand: Monster Tool Company
Model #: 450-301405B
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | | #28 | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #28 |
| Grade | C-2 Sub-Micron |
| Length Group | Jobber |
| Point Shape | Drill Point |
| Coating | TiAlN |
| Measurement Type | Wire Gauge |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | |
| Series/List # | 450 |
| Application | | Drilling | |
| Length Chip Flute (LCF) | 1-3/8″ |
| Connection Diameter Machine Side (DCONMS) | 0.1405″ |
| Overall Length (OAL) | 2-1/2″ |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 118 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 25 Degrees |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.0874 ST FL RHC REAMER
Item #: MW205000000874
Brand: Monster Tool Company
Model #: 500-0000874
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.0874″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1/2″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1/2″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.0874″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.0874″ |
| Overall Length (OAL) | 2″ |
| End Shape | 45° Chamfered End |
| Neck Length (LN) | 3/8″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Cutting Direction (HAND) | Right Hand |
| Single / Double End | Single End |
| Grade | C-2 Sub-Micron |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8-4FL-SE-REG w/.015R TiN
Item #: MW21206603151
Brand: Monster Tool Company
Model #: 206-603151
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| Corner Radius (RE) | 0.015″ |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 3-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.625″ |
| Coating | TiN |
| Series/List # | 206 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It