Tapes & Adhesives > Tape (ET04) - (6378 Products)
Tapes & Adhesives > Tape (ET04)
2 mm (.0787″) Circuit Board Drill
Item #: AV41925000095
Brand: Keo
Model #: 925-000-095
| Product Specifications | |
|---|---|
| Angle | 130 Degrees |
| Flute Count (NOF) | 2 |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 1-1/2″ |
| Cutting Edge Material | Carbide |
| Shank Type | Straight |
| Flute Length | 0.4″ |
| Tool Diameter | 2 mm |
| Usable Length (LU) | 0.4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7/8″ Dia. × 1/2″ Shank Size × 3″ Flute Length × 6″ OAL, 2 Flute, Bright & Black Coated, HSS, 3-Flats Straight Shank, Silver and Deming Drill
Item #: TA15SD92556
Brand: Titan USA
Model #: SD92556
| Product Specifications | |
|---|---|
| Tool Diameter | 7/8″ |
| Usable Length (LU) | 3″ |
| Angle | 118 Degrees |
| Measurement Type | Inch |
| Coating | Bright & Black |
| Flute Count (NOF) | 2 |
| Shank Size (SS) | 1/2″ |
| Overall Length (OAL) | 6″ |
| Cutting Edge Material | HSS |
| Shank Type | 3-Flats Straight |
| Decimal Equivalent | 0.875″ |
| Tool Type | Silver and Deming |
| Flute Length | 3″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
24 CARB STUB DRILL
Item #: MW23460301520
Brand: Monster Tool Company
Model #: 460-301520
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #24 |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #24 |
| Tool Type | Drill |
| Length Group | Short/Stub |
| Grade | C-2 Sub-Micron |
| Coating | Bright |
| Point Shape | Drill Point |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Measurement Type | Wire Gauge |
| Application | | Drilling | |
| Series/List # | 460 |
| Connection Diameter Machine Side (DCONMS) | 0.152″ |
| Length Chip Flute (LCF) | 1″ |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 2-1/16″ |
| Point Angle (SIG) | 135 Degrees |
| Flute Count (NOF) | 2 |
| Functional Length (LF) | 1″ |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 15 Degrees |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
15/32 CARB ST FL DRILL AlTiN
Item #: MW23470104688B
Brand: Monster Tool Company
Model #: 470-104688B
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 15/32″ |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 15/32″ |
| Tool Type | Drill |
| Decimal Equivalent | 0.4688″ |
| Grade | C-2 Sub-Micron |
| Length Group | Standard |
| Point Shape | Notched Drill Point |
| Coating | TiAlN |
| Measurement Type | Inch |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Series/List # | 470 |
| Application | | Drilling | |
| Length Chip Flute (LCF) | 2-1/8″ |
| Connection Diameter Machine Side (DCONMS) | 15/32″ |
| Overall Length (OAL) | 3-5/8″ |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 140 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 2-1/8″ |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1.5mm-4FL-SE-REG-BN (5mm LOC) TiN
Item #: MW21223001410A
Brand: Monster Tool Company
Model #: 223-001410A
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1.5 mm |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 3 mm |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 4.5 mm |
| Length Group | Regular |
| Overall Length (OAL) | 39 mm |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.0591″ |
| Coating | TiN |
| Series/List # | 223 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.0942 ST FL RHC REAMER
Item #: MW205000000942
Brand: Monster Tool Company
Model #: 500-0000942
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.0942″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1/2″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1/2″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.0942″ |
| Tool Type | Reamer |
| Flute Count (NOF) | 4 |
| Decimal Equivalent | 0.0942″ |
| Overall Length (OAL) | 2″ |
| End Shape | 45° Chamfered End |
| Neck Length (LN) | 3/8″ |
| Cutting Diameter Tolerance | +0.0002 / -0.0000 |
| Cutting Direction (HAND) | Right Hand |
| Single / Double End | Single End |
| Grade | C-2 Sub-Micron |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SF-7 L6 D/C
Item #: MW17310002720A
Brand: Monster Tool Company
Model #: 310-002720A
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Series/List # | 310 |
| Depth of Cut Maximum (APMX) | 1″ |
| PackSize | 1.00 |
| Flute Count (NOF) | Double Cut |
| Cutting Direction (HAND) | Right Hand |
| Overall Length (OAL) | 7″ |
| Decimal Equivalent | 0.75″ |
| Cutting Edge Material | Carbide |
| Grade | C-2 Sub-Micron |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Single / Double End | Single End |
| Coating | Bright |
| Length Group | Long Shank |
| End Shape | Tree |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Norton / Part #: 66261175888
Item #: 96421987
Brand: Norton
Model #: 66261175888Product Specifications
Tape Material
Acrylic Foam
Material Family
Foam
Shape
Continuous Roll
Thickness (Decimal Inch - 4 Decimals)
0.0430
Color
Gray
Series
Blue Liner
Length (Inch)
108 in
Maximum Operating Temperature F
0.000
Width (Decimal Inch - 4 Decimals)
1.0000
Minimum Operating Temperature F
0.000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
23/64-2FL-SE-REG BN TiN
Item #: MW21221001089
Brand: Monster Tool Company
Model #: 221-001089
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 23/64″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 1″ |
| Length Group | Regular |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.3594″ |
| Coating | TiN |
| Series/List # | 221 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
EZGR 030030050S PR1225 Grade PVD Carbide, Micro Internal Grooving Bar
Item #: KY90TKB03430
Brand: Kyocera Precision Tools
Model #: TKB03430
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 3 mm |
| Usable Length (LU) | 5 mm |
| Minimum Bore Diameter (DMIN) | 3 mm |
| Shank Height (H) | 2.5 mm |
| Functional Length (LF) | 38.7 mm |
| Cutting Edge Material | Carbide |
| Cutting Direction (HAND) | Right Hand |
| Style | EZG |
| Coating | MEGACOAT |
| Rake Angle Axial (GAMP) | 0 Degrees |
| Grade | PR1225 |
| Rake Angle Radial (GAMF) | 0 Degrees |
| Application | | Micro Int. Grooving | |
| Series/List # | EZB |
| Applicable Material | | Stainless Steel | |
| Measurement Type | Metric |
| Corner Radius (RE) | 0.002″ |
| Overall Length (OAL) | 38.7 mm |
| Functional Width (WF) | 1.25 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.061-4FL-SE-REG-AlTiN
Item #: MW21250205660B
Brand: Monster Tool Company
Model #: 250-205660B
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.061″ |
| Applicable Material | | Stainless Steel | Cast Iron | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 0.183″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.061″ |
| Coating | AlTiN |
| Series/List # | 250 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.041-2FL-SE-STUB
Item #: MW21250300460
Brand: Monster Tool Company
Model #: 250-300460
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.041″ |
| Applicable Material | | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 0.062″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Stub |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.041″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
9.3 mm Dia. × 10 mm Shank Dia. × 136 mm OAL, 140 Degrees, 5xD, 2 Flutes, Aqua Revo D, Solid Carbide Drills
Item #: AC880777124
Brand: Nachi America Inc
Model #: 0777124
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 9.3 mm |
| Functional Length (LF) | 78 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 9.3 mm |
| Tool Type | Drill |
| Length Group | 5xD |
| Usable Length (LU) | 80 mm |
| Coating | Aqua Revo D |
| Overall Length (OAL) | 136 mm |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 140 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.044-2FL-SE-REG-BALL
Item #: MW21250320044
Brand: Monster Tool Company
Model #: 250-320044
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.044″ |
| Application | | Profiling | Plunging | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 0.132″ |
| Length Group | Regular |
| Overall Length (OAL) | 1-1/2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.044″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
58 CARB STUB DRILL TIALN
Item #: 01426584
Brand: Bertech
Model #: PPT2BA-2Product Specifications
Thickness (mil)
3.5000
Color
Black
Width (Inch)
2
Series Part Number
PPT2BA
Application
3D Printing; Fiber Optics Manufacturing; Solar Panels; Aerospace Assembly; Electronic Assembly
Adhesive Material
Acrylic
Tape Material
Polyimide Film
Tensile Strength (Lb./Inch)
50.00
Minimum Operating Temperature C
-29.00
Minimum Operating Temperature F
-20.000
Length Ft.
108.000
Maximum Operating Temperature C
177.000
Maximum Operating Temperature F
351.000
Length (Yards - 2 Decimals)
36.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
29 CARB ST FL DRILL
Item #: MW23470301360
Brand: Monster Tool Company
Model #: 470-301360
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #29 |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #29 |
| Grade | C-2 Sub-Micron |
| Length Group | Standard |
| Point Shape | Notched Drill Point |
| Coating | Bright |
| Measurement Type | Wire Gauge |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Series/List # | 470 |
| Application | | Drilling | |
| Length Chip Flute (LCF) | 15/16″ |
| Connection Diameter Machine Side (DCONMS) | 0.136″ |
| Overall Length (OAL) | 1-15/16″ |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 140 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 15/16″ |
| Single / Double End | Single End |
| Cutting Edge Material | Solid Tungsten Carbide |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
F Dia. x 8 mm Shank Dia. × 130 mm OAL, 140 Degrees, 8xD, 2 Flutes, Aqua Revo D, Solid Carbide Drills
Item #: AC861571264
Brand: Nachi America Inc
Model #: 1571264
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | F |
| Functional Length (LF) | 79 mm |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | F |
| Tool Type | Drill |
| Length Group | 8xD |
| Usable Length (LU) | 81 mm |
| Coating | Aqua Revo D |
| Overall Length (OAL) | 130 mm |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 140 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0.67 mm Dia. × 3 mm Shank Dia. × 38 mm OAL, 120 Degrees, 5xD, 2 Flutes, Aqua Revo D, Solid Carbide Drills
Item #: AC860786682
Brand: Nachi America Inc
Model #: 0786682
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 0.67 mm |
| Functional Length (LF) | 4.9 mm |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 0.67 mm |
| Tool Type | Drill |
| Length Group | 5xD |
| Usable Length (LU) | 6.9 mm |
| Coating | Aqua Revo D |
| Overall Length (OAL) | 38 mm |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Flute Count (NOF) | 2 |
| Connection Diameter Machine Side (DCONMS) | 3 mm |
| Cutting Direction (HAND) | Right Hand |
| Point Angle (SIG) | 120 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13/32 CARB ST FL DRILL
Item #: MW23470104062
Brand: Monster Tool Company
Model #: 470-104062
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13/32″ |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 13/32″ |
| Tool Type | Drill |
| Decimal Equivalent | 0.4063″ |
| Grade | C-2 Sub-Micron |
| Length Group | Standard |
| Point Shape | Notched Drill Point |
| Coating | Bright |
| Measurement Type | Inch |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Series/List # | 470 |
| Application | | Drilling | |
| Length Chip Flute (LCF) | 1-15/16″ |
| Connection Diameter Machine Side (DCONMS) | 13/32″ |
| Overall Length (OAL) | 3-5/16″ |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 140 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 1-15/16″ |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.3431 ST FL RHC REAMER
Item #: MW205000003431
Brand: Monster Tool Company
Model #: 500-0003431
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.3431″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/4″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/4″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.3431″ |
| Decimal Equivalent | 0.3431″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/2″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It