Raw Materials > Rubber & Foam (ET04) - (21944 Products)
Raw Materials > Rubber & Foam (ET04)
47 CARB TWIST DRILL AlTiN
Item #: MW23450300785B
Brand: Monster Tool Company
Model #: 450-300785B
Product Specifications | |
---|---|
Drill Bit Size / Cutting Diameter (DC) | #47 |
Cutting Edge Material | Solid Tungsten Carbide |
Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #47 |
Grade | C-2 Sub-Micron |
Length Group | Jobber |
Point Shape | Drill Point |
Coating | TiAlN |
Measurement Type | Wire Gauge |
Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | |
Series/List # | 450 |
Application | | Drilling | |
Length Chip Flute (LCF) | 7/8″ |
Connection Diameter Machine Side (DCONMS) | 0.0785″ |
Overall Length (OAL) | 1-3/4″ |
Coolant Supply Property (CSP) | External |
Flute Count (NOF) | 2 |
Point Angle (SIG) | 118 Degrees |
Cutting Direction (HAND) | Right Hand |
Flute Helix Angle (FHA) | 25 Degrees |
Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
10mm-4FL-SE-REG BN (22mm LOC) AlTiN
Item #: MW21223001500B
Brand: Monster Tool Company
Model #: 223-001500B
Product Specifications | |
---|---|
Cutting Diameter (DC) | 10 mm |
Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
Connection Diameter Machine Side (DCONMS) | 10 mm |
Grade | C-2 Sub-Micron |
Depth of Cut Maximum (APMX) | 22 mm |
Length Group | Regular |
Overall Length (OAL) | 76 mm |
End Shape | Ballnose |
Cutting Edge Material | Carbide |
Decimal Equivalent | 0.3937″ |
Coating | TiAlN |
Series/List # | 223 |
Flute Count (NOF) | 4 |
Cutting Direction (HAND) | Right Hand |
Flute Helix Angle (FHA) | 30 Degrees |
Center Cutting | Yes |
Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4-4FL FUSION-REG w/.190R AlTiCrN
Item #: MW21284000810
Brand: Monster Tool Company
Model #: 284-000810
Product Specifications | |
---|---|
Cutting Diameter (DC) | 3/4″ |
Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
Connection Diameter Machine Side (DCONMS) | 3/4″ |
Corner Radius (RE) | 0.19″ |
Depth of Cut Maximum (APMX) | 1-1/2″ |
Grade | C-2 Sub-Micron |
Overall Length (OAL) | 4″ |
Length Group | Regular |
Cutting Edge Material | Solid Tungsten Carbide |
Decimal Equivalent | 0.75″ |
Coating | AlTiCrN |
Series/List # | 284 |
Flute Count (NOF) | 4 |
Cutting Direction (HAND) | Right Hand |
Flute Helix Angle (FHA) | Variable |
Single / Double End | Single End |
End Shape | Corner Radius |
Center Cutting | Yes |
Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4996 ST FL RHC REAMER
Item #: MW205000004996
Brand: Monster Tool Company
Model #: 500-0004996
Product Specifications | |
---|---|
Cutting Diameter (DC) | 0.4996″ |
Coating | Bright |
Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
Cutting Edge Material | Solid Tungsten Carbide |
Usable Length (LU) | 1-1/2″ |
Measurement Type | Inch |
Cutting Edge Length (L) | 1-1/2″ |
Series/List # | 500 |
Connection Diameter Machine Side (DCONMS) | 0.4996″ |
Decimal Equivalent | 0.4996″ |
Flute Count (NOF) | 6 |
End Shape | 45° Chamfered End |
Overall Length (OAL) | 4″ |
Cutting Diameter Tolerance | +0.0003 / -0.0000 |
Neck Length (LN) | 1″ |
Single / Double End | Single End |
Cutting Direction (HAND) | Right Hand |
Length Group | Regular |
Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4995 D/P ST FL RHC REAMER
Item #: MW205000004995
Brand: Monster Tool Company
Model #: 500-0004995
Product Specifications | |
---|---|
Cutting Diameter (DC) | 0.4995″ |
Coating | Bright |
Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
Cutting Edge Material | Solid Tungsten Carbide |
Usable Length (LU) | 1-1/2″ |
Measurement Type | Inch |
Cutting Edge Length (L) | 1-1/2″ |
Series/List # | 500 |
Connection Diameter Machine Side (DCONMS) | 0.4995″ |
Tool Type | Dowel Pin Reamer |
Flute Count (NOF) | 6 |
Decimal Equivalent | 0.4995″ |
Overall Length (OAL) | 4″ |
End Shape | 45° Chamfered End |
Neck Length (LN) | 1″ |
Cutting Diameter Tolerance | +0.0003 / -0.0000 |
Cutting Direction (HAND) | Right Hand |
Single / Double End | Single End |
Grade | C-2 Sub-Micron |
Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4101 ST FL RHC REAMER
Item #: MW205000004101
Brand: Monster Tool Company
Model #: 500-0004101
Product Specifications | |
---|---|
Cutting Diameter (DC) | 0.4101″ |
Coating | Bright |
Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
Cutting Edge Material | Solid Tungsten Carbide |
Usable Length (LU) | 1-1/4″ |
Measurement Type | Inch |
Cutting Edge Length (L) | 1-1/4″ |
Series/List # | 500 |
Connection Diameter Machine Side (DCONMS) | 0.4101″ |
Decimal Equivalent | 0.4101″ |
Flute Count (NOF) | 6 |
End Shape | 45° Chamfered End |
Overall Length (OAL) | 3-1/2″ |
Cutting Diameter Tolerance | +0.0003 / -0.0000 |
Neck Length (LN) | 7/8″ |
Single / Double End | Single End |
Cutting Direction (HAND) | Right Hand |
Length Group | Regular |
Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4994 ST FL RHC REAMER
Item #: MW205000004994
Brand: Monster Tool Company
Model #: 500-0004994
Product Specifications | |
---|---|
Cutting Diameter (DC) | 0.4994″ |
Coating | Bright |
Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
Cutting Edge Material | Solid Tungsten Carbide |
Usable Length (LU) | 1-1/2″ |
Measurement Type | Inch |
Cutting Edge Length (L) | 1-1/2″ |
Series/List # | 500 |
Connection Diameter Machine Side (DCONMS) | 0.4994″ |
Decimal Equivalent | 0.4994″ |
Flute Count (NOF) | 6 |
End Shape | 45° Chamfered End |
Overall Length (OAL) | 4″ |
Cutting Diameter Tolerance | +0.0003 / -0.0000 |
Neck Length (LN) | 1″ |
Single / Double End | Single End |
Cutting Direction (HAND) | Right Hand |
Length Group | Regular |
Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/16-2FL-SE-EXT-XX/LG 1-1/2x6 TiN
Item #: MW21216001035
Brand: Monster Tool Company
Model #: 216-001035
Product Specifications | |
---|---|
Cutting Diameter (DC) | 5/16″ |
Applicable Material | | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
Connection Diameter Machine Side (DCONMS) | 5/16″ |
Application | | Slotting | Profiling | Plunging | |
Depth of Cut Maximum (APMX) | 1-1/2″ |
Grade | C-2 Sub-Micron |
Overall Length (OAL) | 6″ |
Length Group | Extended Extra, Extra Long |
Cutting Edge Material | Solid Tungsten Carbide |
Decimal Equivalent | 0.3125″ |
Coating | TiN |
Series/List # | 216 |
Flute Count (NOF) | 2 |
Cutting Direction (HAND) | Right Hand |
Flute Helix Angle (FHA) | 30 Degrees |
Single / Double End | Single End |
End Shape | Square |
Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4993 ST FL RHC REAMER
Item #: MW205000004993
Brand: Monster Tool Company
Model #: 500-0004993
Product Specifications | |
---|---|
Cutting Diameter (DC) | 0.4993″ |
Coating | Bright |
Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
Cutting Edge Material | Solid Tungsten Carbide |
Usable Length (LU) | 1-1/2″ |
Measurement Type | Inch |
Cutting Edge Length (L) | 1-1/2″ |
Series/List # | 500 |
Connection Diameter Machine Side (DCONMS) | 0.4993″ |
Decimal Equivalent | 0.4993″ |
Flute Count (NOF) | 6 |
End Shape | 45° Chamfered End |
Overall Length (OAL) | 4″ |
Cutting Diameter Tolerance | +0.0003 / -0.0000 |
Neck Length (LN) | 1″ |
Single / Double End | Single End |
Cutting Direction (HAND) | Right Hand |
Length Group | Regular |
Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4992 ST FL RHC REAMER
Item #: MW205000004992
Brand: Monster Tool Company
Model #: 500-0004992
Product Specifications | |
---|---|
Cutting Diameter (DC) | 0.4992″ |
Coating | Bright |
Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
Cutting Edge Material | Solid Tungsten Carbide |
Usable Length (LU) | 1-1/2″ |
Measurement Type | Inch |
Cutting Edge Length (L) | 1-1/2″ |
Series/List # | 500 |
Connection Diameter Machine Side (DCONMS) | 0.4992″ |
Decimal Equivalent | 0.4992″ |
Flute Count (NOF) | 6 |
End Shape | 45° Chamfered End |
Overall Length (OAL) | 4″ |
Cutting Diameter Tolerance | +0.0003 / -0.0000 |
Neck Length (LN) | 1″ |
Single / Double End | Single End |
Cutting Direction (HAND) | Right Hand |
Length Group | Regular |
Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4991 ST FL RHC REAMER
Item #: MW205000004991
Brand: Monster Tool Company
Model #: 500-0004991
Product Specifications | |
---|---|
Cutting Diameter (DC) | 0.4991″ |
Coating | Bright |
Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
Cutting Edge Material | Solid Tungsten Carbide |
Usable Length (LU) | 1-1/2″ |
Measurement Type | Inch |
Cutting Edge Length (L) | 1-1/2″ |
Series/List # | 500 |
Connection Diameter Machine Side (DCONMS) | 0.4991″ |
Decimal Equivalent | 0.4991″ |
Flute Count (NOF) | 6 |
End Shape | 45° Chamfered End |
Overall Length (OAL) | 4″ |
Cutting Diameter Tolerance | +0.0003 / -0.0000 |
Neck Length (LN) | 1″ |
Single / Double End | Single End |
Cutting Direction (HAND) | Right Hand |
Length Group | Regular |
Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2 CARB SPOT DRILL 90° AlTiN
Item #: MW23402500090B
Brand: Monster Tool Company
Model #: 402-500090B
Product Specifications | |
---|---|
Drill Bit Size / Cutting Diameter (DC) | 1/2″ |
Application | Drilling |
Drill Bit Size / Cutting Diameter (DC) - Inch | 1/2″ |
Applicable Material | Steel | Stainless Steel | Cast Iron |
Decimal Equivalent | 0.5″ |
Point Shape | Drill Point |
Point Angle (SIG) | 90 Degrees |
Measurement Type | Fractional |
Flute Helix Angle (FHA) | 20 Degrees |
Length Group | Short |
Flute Count (NOF) | 2 |
Cutting Direction (HAND) | Right Hand |
Overall Length (OAL) | 3″ |
Series/List # | 402 |
Connection Diameter Machine Side (DCONMS) | 1/2″ |
Grade | C-2 Sub-Micron |
Coating | AlTiN |
Length Chip Flute (LCF) | 1-1/4″ |
Cutting Edge Material | Solid Tungsten Carbide |
Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/8-4FL-SE-X/LG BN 1-3/4x4 AlTiN
Item #: MW21229001044
Brand: Monster Tool Company
Model #: 229-001044
Product Specifications | |
---|---|
Cutting Diameter (DC) | 3/8″ |
Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
Connection Diameter Machine Side (DCONMS) | 3/8″ |
Grade | C-2 Sub-Micron |
Depth of Cut Maximum (APMX) | 1-3/4″ |
Length Group | Extra Long |
Overall Length (OAL) | 4″ |
End Shape | Ballnose |
Cutting Edge Material | Carbide |
Decimal Equivalent | 0.375″ |
Coating | TiAlN |
Series/List # | 229 |
Flute Count (NOF) | 4 |
Cutting Direction (HAND) | Right Hand |
Flute Helix Angle (FHA) | 30 Degrees |
Center Cutting | Yes |
Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
74517 BLNK-1475 C-2
Item #: 85923472
Brand: USA Sealing
Model #: RS-SBR75-206Product Specifications
Cell Type
Closed
Material
SBR
Thickness (Inch)
3/32
Length Type
Long
Shape
Rectangle
Backing Type
Plain
Width (Inch)
36
Hardness Rating
Medium Hard
Color
Black
Hardness
Durometer 75A
Surface Texture
Smooth
Minimum Temperature (Deg F - 3 Decimals)
-45.000
Maximum Temperature (F) ( - 0 Decimals)
200.000
Tensile Strength (psi)
400
Standards
ASTM D2000 AA 706
Length Ft.
45.000
Durometer Shore A
75A
Density (Lb./Cu. Ft.)
94
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
74583 8MMX102MM GRD ROD
Item #: 51775799
Brand: USA Sealing
Model #: BULK-RS-S30-144Product Specifications
Cell Type
Closed
Material
Silicone
Thickness (Inch)
1/8
Length Type
Standard
Shape
Rectangle
Backing Type
Plain
Width (Inch)
36
Hardness Rating
Soft
Color
Red
Hardness
Durometer 30A
Surface Texture
Smooth
Minimum Temperature (Deg F - 3 Decimals)
-80.000
Maximum Temperature (F) ( - 0 Decimals)
450.000
Tensile Strength (psi)
870
Standards
ASTM D2000 GE 306, FDA 21 CFR 177.2600, MIL-A-A-59588 Type 2A
Length Ft.
6.000
Durometer Shore A
30A
Density (Lb./Cu. Ft.)
78
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.0712 ST FL RHC REAMER
Item #: MW205000000712
Brand: Monster Tool Company
Model #: 500-0000712
Product Specifications | |
---|---|
Cutting Diameter (DC) | 0.0712″ |
Coating | Bright |
Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
Cutting Edge Material | Solid Tungsten Carbide |
Usable Length (LU) | 1/2″ |
Measurement Type | Inch |
Cutting Edge Length (L) | 1/2″ |
Series/List # | 500 |
Connection Diameter Machine Side (DCONMS) | 0.0712″ |
Tool Type | Reamer |
Flute Count (NOF) | 4 |
Decimal Equivalent | 0.0712″ |
Overall Length (OAL) | 1-3/4″ |
End Shape | 45° Chamfered End |
Neck Length (LN) | 3/8″ |
Cutting Diameter Tolerance | +0.0002 / -0.0000 |
Cutting Direction (HAND) | Right Hand |
Single / Double End | Single End |
Grade | C-2 Sub-Micron |
Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
74605 1/2X2 GRD ROD
Item #: 95371936
Brand: USA Sealing
Model #: RS-SBR60-101Product Specifications
Cell Type
Closed
Material
SBR
Thickness (Inch)
1/8
Length Type
Long
Shape
Rectangle
Backing Type
Plain
Width (Inch)
36
Hardness Rating
Medium Hard
Color
Black
Hardness
Durometer 60A
Surface Texture
Smooth
Minimum Temperature (Deg F - 3 Decimals)
-45.000
Maximum Temperature (F) ( - 0 Decimals)
200.000
Tensile Strength (psi)
400
Standards
ASTM D2000 AA 603
Length Ft.
25.000
Durometer Shore A
60A
Density (Lb./Cu. Ft.)
94
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
74927 STB-624 3/16X3/4X6
Item #: 67641811
Brand: USA Sealing
Model #: RS-HUS70-397Product Specifications
Cell Type
Closed
Material
Buna-N
Thickness (Inch)
2
Length Type
Standard
Shape
Rectangle
Backing Type
Plain
Width (Inch)
6
Length (Inch)
36
Hardness Rating
Medium Hard
Color
Black
Hardness
Durometer 70A
Surface Texture
Smooth
Minimum Temperature (Deg F - 3 Decimals)
-30.000
Maximum Temperature (F) ( - 0 Decimals)
250.000
Tensile Strength (psi)
2500
Standards
ASTM D2000 BF 717
Durometer Shore A
70A
Density (Lb./Cu. Ft.)
84
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
74646 1X6 GRD ROD
Item #: 63924393
Brand: USA Sealing
Model #: RS-BHS70-1047Product Specifications
Cell Type
Closed
Material
Buna-N
Thickness (mm)
2.5000
Length Type
Long
Shape
Rectangle
Backing Type
Plain
Width (Inch)
36
Hardness Rating
Medium Hard
Color
Black
Hardness
Durometer 70A
Surface Texture
Smooth
Minimum Temperature (Deg F - 3 Decimals)
-30.000
Maximum Temperature (F) ( - 0 Decimals)
200.000
Tensile Strength (psi)
1500
Standards
ASTM D2000 BF 710
Length Ft.
40.000
Durometer Shore A
70A
Density (Lb./Cu. Ft.)
84
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
75030 STB-832L 1/4X1X12
Item #: 83152595
Brand: USA Sealing
Model #: BULK-RS-S30-75Product Specifications
Cell Type
Closed
Material
Silicone
Thickness (Inch)
1/8
Length Type
Long
Shape
Rectangle
Backing Type
Plain
Width (Inch)
36
Hardness Rating
Soft
Color
Red
Hardness
Durometer 30A
Surface Texture
Smooth
Minimum Temperature (Deg F - 3 Decimals)
-80.000
Maximum Temperature (F) ( - 0 Decimals)
450.000
Tensile Strength (psi)
870
Standards
ASTM D2000 GE 306, FDA 21 CFR 177.2600, MIL-A-A-59588 Type 2A
Length Ft.
10.000
Durometer Shore A
30A
Density (Lb./Cu. Ft.)
78
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It