Raw Materials > Plastics (ET04) - (20259 Products)
Raw Materials > Plastics (ET04)
3 1/4″ Bore Diameter × 3 1/2″ Hone Length × 13.5″ Overall Length, 800 Grit, Aluminum Oxide - Standard Duty Flex-Hone
Item #: MJ73GB314800AO
Brand: Brush Research
Model #: GB314800AO
| Product Specifications | |
|---|---|
| Type | Standard Duty Flex-Hone |
| Hone Length | 3 1/2″ |
| Abrasive Material | Aluminum Oxide |
| Overall Length | 13.5″ |
| Grit | 800 |
| Specification | Non-ferrous Materials |
| Bore Diameter | 3 1/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/8″ Dia. × 0.188″ LOC × 1/4″ Shank Size × 4″ OAL, 4 Flute, Carbide, TiAlN Nano, Ballnose Endmill
Item #: GE90775308C6
Brand: Harvey Tool
Model #: 775308-C6
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/8″ |
| Usable Length (LU) | 2″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Corner Radius (RE) | 0.0625″ |
| Depth of Cut Maximum (APMX) | 0.188″ |
| Body Half Taper Angle (BHTA) | 2 Degrees |
| Overall Length (OAL) | 4″ |
| Length Group | 1.5D |
| Cutting Edge Material | Carbide |
| End Shape | Ball Nose |
| Coating | TiAlN Nano |
| Decimal Equivalent | 0.125″ |
| Flute Count (NOF) | 4 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 30 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Round |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3 1/4″ Bore Diameter × 3 1/2″ Hone Length × 13.5″ Overall Length, 800 Grit, Boron Carbide - Standard Duty Flex-Hone
Item #: MJ73GB314800BC
Brand: Brush Research
Model #: GB314800BC
| Product Specifications | |
|---|---|
| Type | Standard Duty Flex-Hone |
| Hone Length | 3 1/2″ |
| Abrasive Material | Boron Carbide |
| Overall Length | 13.5″ |
| Grit | 800 |
| Specification | Tough Ferrous Materials |
| Bore Diameter | 3 1/4″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/16″ Cutting Dia. × 1/4″ Shank Size × 5/16″ LOC × 2-1/2″ OAL, 2 Flute, Carbide, Amorphous Diamond, Square End Mill
Item #: GE90808962C4
Brand: Harvey Tool
Model #: 808962-C4
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/16″ |
| Usable Length (LU) | 5/16″ |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Applicable Material | | Other Non-Metallic Materials | |
| Depth of Cut Maximum (APMX) | 5/16″ |
| Length Group | 5D |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Body Material | Carbide |
| Coating | Amorphous Diamond |
| Decimal Equivalent | 0.062″ |
| Flute Count (NOF) | 2 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 30 Degrees |
| Shank Size (SS) | 1/4″ |
| Shank Type | Round |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
M10x1 - 4h Ring Gage - No-Go
Item #: ER45L3005100276
Brand: EMUGE-FRANKEN
Model #: L0300510.0276
| Product Specifications | |
|---|---|
| Type | Thread Ring Gage |
| Thread Type | Metric |
| Go / No Go | No-Go |
| Certification | Short form certification included |
| Thread Size | M10x1 |
| Pitch | 1 |
| Classification | 4H |
| Dimension Standards | DIN ISO 1602 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSV-SR-40500-R.060 APLUS COATED
Item #: HS1043512
Brand: Helical Solutions
Model #: 43512
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Applicable Material | | Steel | |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Corner Radius (RE) | 0.06″ |
| Depth of Cut Maximum (APMX) | 1″ |
| Length Group | 2D |
| Overall Length (OAL) | 3″ |
| Decimal Equivalent | 0.5″ |
| Coating | APLUS |
| Measurement Type | Inch |
| Flute Count (NOF) | 4 |
| Shank Length (LS) | 2″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
#26 Dia. × 0.2362″ Shank × 1.2992″ Usable Length × 3.0709″ OAL, 8xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
Item #: AV41928000545
Brand: Keo
Model #: 928-000-545
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | #26 |
| Shank Length (LS) | 1.4173″ |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | #26 |
| Shank Type | Round |
| Length Group | 8xD |
| Measurement Type | Wire Gauge |
| Coating | TiAlN |
| Usable Length (LU) | 1.2992″ |
| Connection Diameter Machine Side (DCONMS) | 0.2362″ |
| Overall Length (OAL) | 3.0709″ |
| Coolant Supply Property (CSP) | Coolant Thru |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 140 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 1.5748″ |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4940 ST FL RHC REAMER
Item #: MW205000004940
Brand: Monster Tool Company
Model #: 500-0004940
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.494″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/2″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/2″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.494″ |
| Decimal Equivalent | 0.494″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 1″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: USA Sealing / Part #: PS-UHMW-ESD-233
Item #: 98244155
Brand: USA Sealing
Model #: PS-UHMW-ESD-233Product Specifications
Material
Polyethylene (UHMW)
Thickness (Inch)
1/2
Width (Inch)
12
Clarity
Opaque
Color
Black
Length (Inch)
48
Performance Properties
Static Control
Backing Type
Plain
Hardness Rating
Medium
Hardness
60D
Shape
Rectangle
Coefficient Of Friction
Very Slippery (Less than 0.25)
Tensile Strength (psi)
4400
Minimum Temperature (Deg F - 3 Decimals)
-20.000
Maximum Temperature (F) ( - 0 Decimals)
180.000
Standards
UL 94 HB
Material Grade
Antistatic
Tolerance (Decimal Inch)
(-0.000" - +0.004")
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: USA Sealing / Part #: PS-UHMW-ESD-224
Item #: 98241797
Brand: USA Sealing
Model #: PS-UHMW-ESD-224Product Specifications
Material
Polyethylene (UHMW)
Thickness (Inch)
1/4
Width (Inch)
24
Clarity
Opaque
Color
Black
Length (Inch)
48
Performance Properties
Static Control
Backing Type
Plain
Hardness Rating
Medium
Hardness
60D
Shape
Rectangle
Coefficient Of Friction
Very Slippery (Less than 0.25)
Tensile Strength (psi)
4400
Minimum Temperature (Deg F - 3 Decimals)
-20.000
Maximum Temperature (F) ( - 0 Decimals)
180.000
Standards
UL 94 HB
Material Grade
Antistatic
Tolerance (Decimal Inch)
(-0.002" - +0.000")
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
2.48 mm Dia. × 2.5 mm Shank Dia. × 35 mm OAL × 14 mm Flute Length, 120 Degrees, 2 Flute, HSS-E, Micro Drill
Item #: FB505100248R
Brand: GMauvias
Model #: 5100248R
| Product Specifications | |
|---|---|
| Tool Diameter | 2.48 mm |
| Connection Diameter Machine Side (DCONMS) | 2.5 mm |
| Cutting Edge Material | HSS-E |
| Flute Length | 14 mm |
| Flute Count (NOF) | 2 |
| Overall Length (OAL) | 35 mm |
| Angle | 120 Degrees |
| Length Group | 5xD |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It