Email: [email protected] | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 4 - (149589 Products)

SGS - 1" Diam, 2-1/4" LOC, 2 Flute Solid Carbide Ball End Mill - TiN Finish, Single End, 5" OAL, 1" Shank Diam, Spiral Flute - Caliber Tooling

SGS - 1" Diam, 2-1/4" LOC, 2 Flute Solid Carbide Ball End Mill - TiN Finish, Single End, 5" OAL, 1" Shank Diam, Spiral Flute


Item #: 58980764
Brand: SGS
Model #: 31839
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 2
Length of Cut (Inch) 2-1/4
Length of Cut (Decimal Inch) 2.2500
Material Solid Carbide
Overall Length (Inch) 5
Shank Diameter (Inch) 1
Finish/Coating TiN
Single or Double End Single
Helix Angle 30.00
Extended Reach No
Material Grade Micrograin
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002
Flute Type Spiral
Undercutting No
Shank Diameter Tolerance (Decimal Inch) +0.00000/-0.00051
Length Type Long
Cutting Direction Right Hand
Flute Direction Right Hand

$488.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 1" Diam, 2-1/4" LOC, 2 Flute Solid Carbide Ball End Mill - TiCN Finish, Single End, 5" OAL, 1" Shank Diam, Spiral Flute - Caliber Tooling

SGS - 1" Diam, 2-1/4" LOC, 2 Flute Solid Carbide Ball End Mill - TiCN Finish, Single End, 5" OAL, 1" Shank Diam, Spiral Flute


Item #: 93545796
Brand: SGS
Model #: 31849
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steel, cast iron and aluminum alloys.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 2
Length of Cut (Inch) 2-1/4
Length of Cut (Decimal Inch) 2.2500
Material Solid Carbide
Overall Length (Inch) 5
Shank Diameter (Inch) 1
Finish/Coating TiCN
Single or Double End Single
Helix Angle 30.00
Extended Reach No
Material Grade Micrograin
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002
Flute Type Spiral
Shank Diameter Tolerance (Decimal Inch) +0.00000/-0.00051
Length Type Long
Series/List 3LB
Cutting Direction Right Hand
Flute Direction Right Hand

$488.06

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Kennametal - 1/2", 9 Flute, Solid Carbide, 0.381mm Corner Radius End Mill - 5" OAL, 36° Helix, 1" LOC, Right Hand Cut - Caliber Tooling

Kennametal - 1/2", 9 Flute, Solid Carbide, 0.381mm Corner Radius End Mill - 5" OAL, 36° Helix, 1" LOC, Right Hand Cut


Item #: 38054771
Brand: Kennametal
Model #: 5964128
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive-resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloys, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Mill Diameter (Inch) 1/2
End Type Corner Radius
Corner Radius (mm) 0.381
Corner Radius (Decimal Inch) 0.0150
Number of Flutes 9
Material Solid Carbide
Finish/Coating AlTiN
Length of Cut (Inch) 1
Shank Diameter (Inch) 1/2
Overall Length (Inch) 5
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 36
Reach Length (mm) 63.50
Reach Length (Decimal Inch) 2.5000
Neck Diameter (mm) 11.94
Neck Diameter (Decimal Inch) 0.4700
Material Grade KC643M
Additional Information SAFE-LOCK Shank

$255.53

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 1", 2-1/4" LOC, 1" Shank Diam, 5" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, TiCN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 464 - Caliber Tooling

OSG - 1", 2-1/4" LOC, 1" Shank Diam, 5" OAL, 4 Flute, Solid Carbide Square End Mill - Single End, TiCN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 464


Item #: 44837250
Brand: OSG
Model #: 464-100008
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steels, cast iron and aluminum alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 4
Length of Cut (Inch) 2-1/4
Length of Cut (Decimal Inch) 2.2500
Material Solid Carbide
Finish/Coating TiCN
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 5
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Long
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.001
Material Grade Micrograin
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) +0.00000/-0.0005
Series/List 464

$463.66

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Atrax - 7/8" Diam, 1-1/2" LOC, 4 Flute Solid Carbide Ball End Mill - AlTiN Finish, Single End, 4" OAL, 7/8" Shank Diam - Caliber Tooling

Atrax - 7/8" Diam, 1-1/2" LOC, 4 Flute Solid Carbide Ball End Mill - AlTiN Finish, Single End, 4" OAL, 7/8" Shank Diam


Item #: 06610190
Brand: Atrax
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Mill Diameter (Inch) 7/8
Mill Diameter (Decimal Inch) 0.8750
Number of Flutes 4
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Material Solid Carbide
Overall Length (Inch) 4
Shank Diameter (Inch) 7/8
Finish/Coating AlTiN
Single or Double End Single
Helix Angle 30.00
Material Grade Micrograin
Cutting Direction Right Hand
Flute Direction Right Hand

$475.27

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Walter-Prototyp - Roughing End Mill - - Exact Industrial Supply

Walter-Prototyp - Roughing End Mill -


Item #: 94302098
Brand: Walter-Prototyp
Model #: 7438084

Product Specifications

Roughing End Mill -

$442.98

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 1" Diam, Variable Pitch, 1-1/8" LOC, 5 Flute Solid Carbide 0.19" Corner Radius Roughing End Mill - Ti-NAMITE-M Finish, 4" OAL, 1" Shank Diam, Single End, 37° Helix - Caliber Tooling

SGS - 1" Diam, Variable Pitch, 1-1/8" LOC, 5 Flute Solid Carbide 0.19" Corner Radius Roughing End Mill - Ti-NAMITE-M Finish, 4" OAL, 1" Shank Diam, Single End, 37° Helix


Item #: 47082060
Brand: SGS
Model #: 37128
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Ti-Namite-M offers high wear resistance, reduced friction and excellent prevention of cutting edge build up. It provides superior material removal rates and tool life when used in high performance operations with difficult to machine materials like titanium. Ti-Namite-M is a proprietary coating exclusive to SGS Tool Company.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 5
Pitch Variable
Length of Cut (Inch) 1-1/8
Length of Cut (Decimal Inch) 1.1250
Shank Diameter (Inch) 1
End Type Corner Radius
Material Solid Carbide
Finish/Coating Ti-NAMITE-M
Overall Length (Inch) 4
Centercutting NonCenter Cutting
Helix Angle 37.00
Extended Reach No
Corner Radius (Decimal Inch) 0.1900
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Flute Type Spiral
Mill Diameter Tolerance (Decimal Inch) -0.0000/-0.0020
Overall Length (Decimal Inch) 4.0000
Series/List Z5CR

$494.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Emuge - Solid Carbide Roughing & Finishing End Mill - Caliber Tooling

Emuge - Solid Carbide Roughing & Finishing End Mill


Item #: 58778473
Brand: Emuge
Model #: 1828A.0625
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high-speed applications on cast iron, nonferrous materials, plastic and other tough-to-machine materials.

Product Specifications

Solid Carbide Roughing & Finishing End Mill -
Material Solid Carbide

$494.30

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 1" Diam, Variable Pitch, 1-1/8" LOC, 5 Flute Solid Carbide 0.12" Corner Radius Roughing End Mill - Ti-NAMITE-M Finish, 4" OAL, 1" Shank Diam, Single End, 37° Helix - Caliber Tooling

SGS - 1" Diam, Variable Pitch, 1-1/8" LOC, 5 Flute Solid Carbide 0.12" Corner Radius Roughing End Mill - Ti-NAMITE-M Finish, 4" OAL, 1" Shank Diam, Single End, 37° Helix


Item #: 47081450
Brand: SGS
Model #: 37127
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Ti-Namite-M offers high wear resistance, reduced friction and excellent prevention of cutting edge build up. It provides superior material removal rates and tool life when used in high performance operations with difficult to machine materials like titanium. Ti-Namite-M is a proprietary coating exclusive to SGS Tool Company.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 5
Pitch Variable
Length of Cut (Inch) 1-1/8
Length of Cut (Decimal Inch) 1.1250
Shank Diameter (Inch) 1
End Type Corner Radius
Material Solid Carbide
Finish/Coating Ti-NAMITE-M
Overall Length (Inch) 4
Centercutting NonCenter Cutting
Helix Angle 37.00
Extended Reach No
Corner Radius (Decimal Inch) 0.1200
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Flute Type Spiral
Mill Diameter Tolerance (Decimal Inch) -0.0000/-0.0020
Overall Length (Decimal Inch) 4.0000
Series/List Z5CR

$494.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 1", 2-1/4" LOC, 1" Shank Diam, 5" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3147 - Caliber Tooling

Guhring - 1", 2-1/4" LOC, 1" Shank Diam, 5" OAL, 2 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3147


Item #: 58536434
Brand: Guhring
Model #: 9031470254000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 2
Length of Cut (Inch) 2-1/4
Length of Cut (Decimal Inch) 2.2500
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 5
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Long
Material Grade Ultra Fine Grain
Chipbreaker No
Extended Reach No
Series/List 3147

$448.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Guhring - 1", 2-1/4" LOC, 1" Shank Diam, 5" OAL, 6 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3152 - Caliber Tooling

Guhring - 1", 2-1/4" LOC, 1" Shank Diam, 5" OAL, 6 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 3152


Item #: 58535659
Brand: Guhring
Model #: 9031520254000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 6
Length of Cut (Inch) 2-1/4
Length of Cut (Decimal Inch) 2.2500
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 5
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Long
Material Grade Ultra Fine Grain
Chipbreaker No
Extended Reach No
Series/List 3152

$448.25

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Kennametal - 25mm Diam, 45mm LOC, 6 Flute Solid Carbide 45° Corner Chamfer Roughing End Mill - 121mm OAL, 63/64" Shank Diam, Single End, Centercutting, 45° Helix - Caliber Tooling

Kennametal - 25mm Diam, 45mm LOC, 6 Flute Solid Carbide 45° Corner Chamfer Roughing End Mill - 121mm OAL, 63/64" Shank Diam, Single End, Centercutting, 45° Helix


Item #: 46876991
Brand: Kennametal
Model #: 4047281
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Mill Diameter (mm) 25.00
Mill Diameter (Decimal Inch) 0.9843
Number of Flutes 6
Length of Cut (mm) 45.00
Length of Cut (Decimal Inch) 1.7717
Shank Diameter (mm) 25.00
Shank Diameter (Inch) 63/64
End Type Corner Chamfer
Material Solid Carbide
Overall Length (mm) 121.00
Centercutting Center Cutting
Helix Angle 45.00
Extended Reach No
Chamfer Width (mm) 1.25
Chamfer Width (Decimal Inch) 0.0492
Coolant Induced No
Chamfer Angle 45
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Long
Flute Type Spiral
Helix Style High
Mill Diameter Tolerance (mm) +0.000/-0.130
Shank Diameter Tolerance (mm) +0.000/-0.013
Overall Length (Decimal Inch) 4.7638
Series/List F6BJ

$501.51

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 20mm, 11 Flute, Single End, Solid Carbide, 0.1575" Corner Radius End Mill - 104mm OAL, 35° Helix, 38mm LOC, Right Hand Cut - Caliber Tooling

SGS - 20mm, 11 Flute, Single End, Solid Carbide, 0.1575" Corner Radius End Mill - 104mm OAL, 35° Helix, 38mm LOC, Right Hand Cut


Item #: 47368832
Brand: SGS
Model #: 46652
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive-resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloys, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Mill Diameter (mm) 20.00
End Type Corner Radius
Corner Radius (Decimal Inch) 0.1575
Number of Flutes 11
Material Solid Carbide
Finish/Coating AlTiN
Length of Cut (mm) 38.00
Length of Cut (Decimal Inch) 1.4960
Shank Diameter (mm) 20.00
Overall Length (mm) 104.00
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 35
Single or Double End Single
Series/List 66MC

$474.82

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 20mm, 11 Flute, Single End, Solid Carbide, 0.0984" Corner Radius End Mill - 104mm OAL, 35° Helix, 38mm LOC, Right Hand Cut - Caliber Tooling

SGS - 20mm, 11 Flute, Single End, Solid Carbide, 0.0984" Corner Radius End Mill - 104mm OAL, 35° Helix, 38mm LOC, Right Hand Cut


Item #: 47370366
Brand: SGS
Model #: 46650
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive-resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloys, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Mill Diameter (mm) 20.00
End Type Corner Radius
Corner Radius (Decimal Inch) 0.0984
Number of Flutes 11
Material Solid Carbide
Finish/Coating AlTiN
Length of Cut (mm) 38.00
Length of Cut (Decimal Inch) 1.4960
Shank Diameter (mm) 20.00
Overall Length (mm) 104.00
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 35
Single or Double End Single
Series/List 66MC

$474.82

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 20mm, 11 Flute, Single End, Solid Carbide, 0.0591" Corner Radius End Mill - 104mm OAL, 35° Helix, 38mm LOC, Right Hand Cut - Caliber Tooling

SGS - 20mm, 11 Flute, Single End, Solid Carbide, 0.0591" Corner Radius End Mill - 104mm OAL, 35° Helix, 38mm LOC, Right Hand Cut


Item #: 47369038
Brand: SGS
Model #: 46648
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive-resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloys, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Mill Diameter (mm) 20.00
End Type Corner Radius
Corner Radius (Decimal Inch) 0.0591
Number of Flutes 11
Material Solid Carbide
Finish/Coating AlTiN
Length of Cut (mm) 38.00
Length of Cut (Decimal Inch) 1.4960
Shank Diameter (mm) 20.00
Overall Length (mm) 104.00
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 35
Single or Double End Single
Series/List 66MC

$474.82

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 20mm, 11 Flute, Single End, Solid Carbide, 0.1969" Corner Radius End Mill - 104mm OAL, 35° Helix, 38mm LOC, Right Hand Cut - Caliber Tooling

SGS - 20mm, 11 Flute, Single End, Solid Carbide, 0.1969" Corner Radius End Mill - 104mm OAL, 35° Helix, 38mm LOC, Right Hand Cut


Item #: 47370465
Brand: SGS
Model #: 46653
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive-resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloys, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Mill Diameter (mm) 20.00
End Type Corner Radius
Corner Radius (Decimal Inch) 0.1969
Number of Flutes 11
Material Solid Carbide
Finish/Coating AlTiN
Length of Cut (mm) 38.00
Length of Cut (Decimal Inch) 1.4960
Shank Diameter (mm) 20.00
Overall Length (mm) 104.00
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 35
Single or Double End Single
Series/List 66MC

$474.82

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 1", 1-1/2" LOC, 1" Shank Diam, 4" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 60° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 460C - Caliber Tooling

OSG - 1", 1-1/2" LOC, 1" Shank Diam, 4" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, Spiral Flute, 60° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 460C


Item #: 55463707
Brand: OSG
Model #: 460-1000
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 3
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 4
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 60.00
Flute Type Spiral
Length Type Regular
Helix Style High
Chipbreaker No
Extended Reach No
Series/List 460C

$311.44

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Cleveland - 1", 4" LOC, 1" Shank Diam, 6-1/2" OAL, 4 Flute, Powdered Metal Square End Mill - Single End, TiCN Finish, Spiral Flute, 37° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series PM-4 - Caliber Tooling

Cleveland - 1", 4" LOC, 1" Shank Diam, 6-1/2" OAL, 4 Flute, Powdered Metal Square End Mill - Single End, TiCN Finish, Spiral Flute, 37° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series PM-4


Item #: 87446530
Brand: Cleveland
Model #: C32041
Exact Tooling IR#: 04

Features and Benefits

Powdered Metal (PM) is tougher and more cost effective than solid carbide. It is commonly used on highly abrasive materials including high silicon aluminums.
Titanium carbonitride (TiCN) is harder and more wear resistant than TiN. It is commonly used on stainless steels, cast iron and aluminum alloys.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 25.40
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 4
Length of Cut (Inch) 4
Length of Cut (Decimal Inch) 4.0000
Material Powdered Metal
Finish/Coating TiCN
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 6-1/2
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 37.00
Flute Type Spiral
Length Type Regular
Material Grade M42
Chipbreaker No
Extended Reach No
Series/List PM-4

$330.55

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

SGS - 20mm Diam, 75mm LOC, 2 Flute Solid Carbide Ball End Mill - Uncoated, Single End, 150mm OAL, 20mm Shank Diam, Spiral Flute - Caliber Tooling

SGS - 20mm Diam, 75mm LOC, 2 Flute Solid Carbide Ball End Mill - Uncoated, Single End, 150mm OAL, 20mm Shank Diam, Spiral Flute


Item #: 89915227
Brand: SGS
Model #: 43386
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Mill Diameter (mm) 20.00
Mill Diameter (Decimal Inch) 0.7874
Number of Flutes 2
Length of Cut (mm) 75.00
Length of Cut (Decimal Inch) 2.9528
Material Solid Carbide
Overall Length (mm) 150.00
Shank Diameter (mm) 20.00
Finish/Coating Uncoated
Single or Double End Single
Helix Angle 30.00
Extended Reach No
Material Grade Micrograin
Mill Diameter Tolerance (mm) +0.000/-0.050
Flute Type Spiral
Undercutting No
Shank Diameter Tolerance (mm) 0.000/-0.013
Length Type Extra Long
Cutting Direction Right Hand
Flute Direction Right Hand

$487.32

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

M.A. Ford - 1", 4-1/8" LOC, 1" Shank Diam, 7" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, 36° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 138 - Caliber Tooling

M.A. Ford - 1", 4-1/8" LOC, 1" Shank Diam, 7" OAL, 3 Flute, Solid Carbide Square End Mill - Single End, Uncoated, 36° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series 138


Item #: 65781940
Brand: M.A. Ford
Model #: 13810008
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 3
Length of Cut (Inch) 4-1/8
Length of Cut (Decimal Inch) 4.1250
Material Solid Carbide
Finish/Coating Uncoated
Shank Diameter (Inch) 1
Single or Double End Single
Overall Length (Inch) 7
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 36.00
Chipbreaker No
Extended Reach No
Series/List 138

$537.79

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It