Email: [email protected] | Phone: (888) 988-8820
We ship from multiple warehouses throughout the USA
to get you what you need as fast as possible!
Millions of items in stock!
Fast online checkout - No account required
Cart 0
Cart 0

MSC Up To 2022 Part 4 - (149589 Products)

Accupro - 7° Taper Angle per Side, 1/8" Small End Diam, 1-1/2" LOC, Solid Carbide 3 Flute Tapered Square End Mill - 3-1/2" OAL, 1/2" Shank Diam, Spiral Flute - Caliber Tooling

Accupro - 7° Taper Angle per Side, 1/8" Small End Diam, 1-1/2" LOC, Solid Carbide 3 Flute Tapered Square End Mill - 3-1/2" OAL, 1/2" Shank Diam, Spiral Flute


Item #: 02257707
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Product Specifications
Material Solid Carbide
End Type Square
Taper Angle Per Side 7.00
Small End Diameter (Inch) 1/8
Small End Diameter (Decimal Inch) 0.1250
Shank Diameter (Inch) 1/2
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Number of Flutes 3
Finish/Coating Uncoated
Overall Length (Inch) 3-1/2
Material Grade Micrograin
Flute Type Spiral
Flute Direction Right Hand
Centercutting Yes

$138.16

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Sandvik Coromant - 3/16", 9/16" LOC, 1/4" Shank Diam, 3" OAL, 6 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 50° Helix, Right Hand Cut, Right Hand Flute, Series CoroMill Plura - Caliber Tooling

Sandvik Coromant - 3/16", 9/16" LOC, 1/4" Shank Diam, 3" OAL, 6 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 50° Helix, Right Hand Cut, Right Hand Flute, Series CoroMill Plura


Item #: 49394927
Brand: Sandvik Coromant
Model #: 5739922
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 3/16
Mill Diameter (Decimal Inch) 0.1875
Number of Flutes 6
Length of Cut (Inch) 9/16
Length of Cut (Decimal Inch) 0.5710
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (Inch) 1/4
Single or Double End Single
Overall Length (Inch) 3
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 50
Flute Type Spiral
Length Type Extra Long
Helix Style High
Mill Diameter Tolerance (Decimal Inch) H10
Neck Length (Decimal Inch) 0.1790
Manufacturer Grade 1620
Maximum Helix Angle 50
Reach Length (Decimal Inch) 0.7500
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) h6
Series/List CoroMill Plura

$169.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Sandvik Coromant - 1/4", 3/4" LOC, 1/4" Shank Diam, 3" OAL, 6 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 50° Helix, Right Hand Cut, Right Hand Flute, Series CoroMill Plura - Caliber Tooling

Sandvik Coromant - 1/4", 3/4" LOC, 1/4" Shank Diam, 3" OAL, 6 Flute, Solid Carbide Square End Mill - Single End, TiAlN Finish, Spiral Flute, 50° Helix, Right Hand Cut, Right Hand Flute, Series CoroMill Plura


Item #: 49395403
Brand: Sandvik Coromant
Model #: 5739929
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 1/4
Mill Diameter (Decimal Inch) 0.2500
Number of Flutes 6
Length of Cut (Inch) 3/4
Length of Cut (Decimal Inch) 0.7500
Material Solid Carbide
Finish/Coating TiAlN
Shank Diameter (Inch) 1/4
Single or Double End Single
Overall Length (Inch) 3
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 50
Flute Type Spiral
Length Type Extra Long
Helix Style High
Mill Diameter Tolerance (Decimal Inch) H10
Manufacturer Grade 1620
Maximum Helix Angle 50
Chipbreaker No
Extended Reach No
Shank Diameter Tolerance (Decimal Inch) h6
Series/List CoroMill Plura

$169.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 7/8", 5" LOC, 7/8" Shank Diam, 7-1/4" OAL, 4 Flute, Cobalt Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 557 - Caliber Tooling

OSG - 7/8", 5" LOC, 7/8" Shank Diam, 7-1/4" OAL, 4 Flute, Cobalt Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Right Hand Cut, Right Hand Flute, Series 557


Item #: 63527592
Brand: OSG
Model #: 5574100
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Non-Center Cutting applications have peripheral teeth allowing for the user to side (radial) cut or contour an exterior surface. Used in applications where plunge cutting is not necessary.
Product Specifications
Mill Diameter (Inch) 7/8
Mill Diameter (Decimal Inch) 0.8750
Number of Flutes 4
Length of Cut (Inch) 5
Length of Cut (Decimal Inch) 5.0000
Material Cobalt
Finish/Coating Uncoated
Shank Diameter (Inch) 7/8
Single or Double End Single
Overall Length (Inch) 7-1/4
Center Cutting NonCenter Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Extra Long
Material Grade M42
Chipbreaker No
Extended Reach No
Series/List 557

$118.95

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Cleveland - 3/4", 3" LOC, 3/4" Shank Diam, 5-1/4" OAL, 4 Flute, High Speed Steel Square End Mill - Single End, TiN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series HG-4C - Caliber Tooling

Cleveland - 3/4", 3" LOC, 3/4" Shank Diam, 5-1/4" OAL, 4 Flute, High Speed Steel Square End Mill - Single End, TiN Finish, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute, Series HG-4C


Item #: 87416178
Brand: Cleveland
Model #: C33396
Exact Tooling IR#: 04

Features and Benefits

High speed steel (HSS) provides good wear resistance. It is commonly used for general purpose applications on both ferrous and nonferrous materials.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (mm) 19.05
Mill Diameter (Inch) 3/4
Mill Diameter (Decimal Inch) 0.7500
Number of Flutes 4
Length of Cut (Inch) 3
Length of Cut (Decimal Inch) 3.0000
Material High Speed Steel
Finish/Coating TiN
Shank Diameter (Inch) 3/4
Single or Double End Single
Overall Length (Inch) 5-1/4
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Chipbreaker No
Extended Reach No
Series/List HG-4C

$109.17

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Iscar - 12mm, 5 Flute, Single End, Solid Carbide, Corner Chamfer End Mill - 83mm OAL, 38° Helix, Right Hand Flute, 30mm LOC, Right Hand Cut - Caliber Tooling

Iscar - 12mm, 5 Flute, Single End, Solid Carbide, Corner Chamfer End Mill - 83mm OAL, 38° Helix, Right Hand Flute, 30mm LOC, Right Hand Cut


Item #: 91120964
Brand: Iscar
Model #: 5622541
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium aluminum nitride (TiAlN) has a higher hardness than TiN and TiCN. It is extremely heat resistant and commonly used for high speed applications on stainless steels, nickel and titanium alloys.
Product Specifications
Mill Diameter (mm) 12.00
Mill Diameter (Decimal Inch) 0.4724
End Type Corner Chamfer
Chamfer Width (mm) 0.400
Chamfer Width (Decimal Inch) 0.0157
Number of Flutes 5
Material Solid Carbide
Finish/Coating TiAlN
Length of Cut (mm) 30.00
Length of Cut (Decimal Inch) 1.1811
Shank Diameter (mm) 12.00
Overall Length (mm) 83.00
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 38.00
Chamfer Angle 45
Material Grade Submicron
Single or Double End Single
Length Type Regular
Centercutting No
Flute Direction Right Hand
Mill Diameter Tolerance (mm) -0.032 to 0.059
Shank Diameter Tolerance (mm) 0.000/-0.011
Extended Reach No

$172.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

OSG - 1/4" Diam, 3/8" LOC, 2 Flute Solid Carbide Ball End Mill - TiAlN Finish, Single End, 2" OAL, 1/4" Shank Diam, Spiral Flute - Caliber Tooling

OSG - 1/4" Diam, 3/8" LOC, 2 Flute Solid Carbide Ball End Mill - TiAlN Finish, Single End, 2" OAL, 1/4" Shank Diam, Spiral Flute


Item #: 77944163
Brand: OSG
Model #: 90101111
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Titanium Aluminum Nitride (TiAlN) has a higher hardness and oxidation temperature versus TiN and TiCN. As a result, it is particularly advantageous for higher speed operations in a variety of steel machining applications.
Product Specifications
Mill Diameter (Inch) 1/4
Mill Diameter (Decimal Inch) 0.2500
Number of Flutes 2
Length of Cut (Inch) 3/8
Length of Cut (Decimal Inch) 0.3750
Material Solid Carbide
Overall Length (Inch) 2
Shank Diameter (Inch) 1/4
Finish/Coating TiAlN
Single or Double End Single
Helix Angle 30.00
Extended Reach No
Material Grade Ultra-Fine Micrograin
Flute Type Spiral
Series/List 9010
Cutting Direction Right Hand
Flute Direction Right Hand

$137.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 11/16" Diam, 1-1/2" LOC, 2 Flute Solid Carbide Ball End Mill - Uncoated, Single End, 4" OAL, 3/4" Shank Diam, Spiral Flute - Caliber Tooling

Accupro - 11/16" Diam, 1-1/2" LOC, 2 Flute Solid Carbide Ball End Mill - Uncoated, Single End, 4" OAL, 3/4" Shank Diam, Spiral Flute


Item #: 07760945
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Mill Diameter (Inch) 11/16
Mill Diameter (Decimal Inch) 0.6875
Number of Flutes 2
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Material Solid Carbide
Overall Length (Inch) 4
Shank Diameter (Inch) 3/4
Finish/Coating Uncoated
Single or Double End Single
Helix Angle 40.00
Extended Reach No
Material Grade Micrograin
Mill Diameter Tolerance (Decimal Inch) +0.000/-0.002
Flute Type Spiral
Shank Diameter Tolerance (Decimal Inch) -0.0001/-0.0004
Cutting Direction Right Hand
Flute Direction Right Hand

$137.05

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 7/16" Diam, 1-1/2" LOC, 3 Flute Solid Carbide Ball End Mill - AlTiN Finish, Single End, 6" OAL, 7/16" Shank Diam, Spiral Flute - Caliber Tooling

Accupro - 7/16" Diam, 1-1/2" LOC, 3 Flute Solid Carbide Ball End Mill - AlTiN Finish, Single End, 6" OAL, 7/16" Shank Diam, Spiral Flute


Item #: 76489160
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Mill Diameter (Inch) 7/16
Mill Diameter (Decimal Inch) 0.4375
Number of Flutes 3
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Material Solid Carbide
Overall Length (Inch) 6
Shank Diameter (Inch) 7/16
Finish/Coating AlTiN
Single or Double End Single
Helix Angle 40.00
Extended Reach No
Material Grade Micrograin
Flute Type Spiral
Length Type Extra Long
Cutting Direction Right Hand
Flute Direction Right Hand

$115.17

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Emuge - 6mm Diam, Fine Pitch, 13mm LOC, 4 Flute Solid Carbide 1mm Corner Radius Roughing End Mill - TiN/TiAlN Finish, 62mm OAL, 6mm Shank Diam, Single End, Extended Reach, 45° Helix - Caliber Tooling

Emuge - 6mm Diam, Fine Pitch, 13mm LOC, 4 Flute Solid Carbide 1mm Corner Radius Roughing End Mill - TiN/TiAlN Finish, 62mm OAL, 6mm Shank Diam, Single End, Extended Reach, 45° Helix


Item #: 47949946
Brand: Emuge
Model #: 2659TZ.006010
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
TiN/TiAlN s a multilayer coating that combines the high hardness of TiN and the heat resistance of TiAlN. It is commonly used on softer materials in general purpose applications.
Product Specifications
Mill Diameter (mm) 6.00
Number of Flutes 4
Pitch Fine
Length of Cut (mm) 13.00
Shank Diameter (mm) 6.00
End Type Corner Radius
Material Solid Carbide
Finish/Coating TiN/TiAlN
Overall Length (mm) 62.00
Centercutting NonCenter Cutting
Helix Angle 45.00
Extended Reach Yes
Corner Radius (mm) 1.00
Coolant Induced Yes
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Extra Long
Flute Type Spiral
Reach Length (mm) 25
Series/List 2659TZ
Additional Information Semi-Finished Fine Roughing Flute Profiles for Optimum Performance; Standard Corner Radius Design

$126.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 1" Diam, Coarse Pitch, 4" LOC, 3 Flute Cobalt Roughing Square End Mill - TiN Finish, 6-1/2" OAL, 1" Shank Diam, Single End, Centercutting, 37° Helix - Caliber Tooling

Hertel - 1" Diam, Coarse Pitch, 4" LOC, 3 Flute Cobalt Roughing Square End Mill - TiN Finish, 6-1/2" OAL, 1" Shank Diam, Single End, Centercutting, 37° Helix


Item #: 84511799
Brand: Hertel
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Titanium Nitride (TiN) is a multi-purpose coating which increases chip flow in softer materials. The heat and hardness resistance allows the tool to run at higher speeds than uncoated tools.
Product Specifications
Mill Diameter (Inch) 1
Mill Diameter (Decimal Inch) 1.0000
Number of Flutes 3
Pitch Coarse
Length of Cut (Inch) 4
Length of Cut (Decimal Inch) 4.0000
Shank Diameter (Inch) 1
End Type Square End
Material Cobalt
Finish/Coating TiN
Overall Length (Inch) 6-1/2
Centercutting Center Cutting
Helix Angle 37.00
Extended Reach No
Material Grade M42
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand

$120.80

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Emuge - 6mm Diam, Fine Pitch, 13mm LOC, 4 Flute Solid Carbide 0.5mm Corner Radius Roughing End Mill - TiN/TiAlN Finish, 62mm OAL, 6mm Shank Diam, Single End, Extended Reach, 45° Helix - Caliber Tooling

Emuge - 6mm Diam, Fine Pitch, 13mm LOC, 4 Flute Solid Carbide 0.5mm Corner Radius Roughing End Mill - TiN/TiAlN Finish, 62mm OAL, 6mm Shank Diam, Single End, Extended Reach, 45° Helix


Item #: 47952304
Brand: Emuge
Model #: 2658TZ.006005
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
TiN/TiAlN s a multilayer coating that combines the high hardness of TiN and the heat resistance of TiAlN. It is commonly used on softer materials in general purpose applications.
Product Specifications
Mill Diameter (mm) 6.00
Number of Flutes 4
Pitch Fine
Length of Cut (mm) 13.00
Shank Diameter (mm) 6.00
End Type Corner Radius
Material Solid Carbide
Finish/Coating TiN/TiAlN
Overall Length (mm) 62.00
Centercutting NonCenter Cutting
Helix Angle 45.00
Extended Reach Yes
Corner Radius (mm) 0.50
Coolant Induced Yes
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Extra Long
Flute Type Spiral
Reach Length (mm) 25
Series/List 2658TZ
Additional Information Semi-Finished Fine Roughing Flute Profiles for Optimum Performance; Standard Corner Radius Design

$126.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 1-1/4" Diam, Fine Pitch, 2" LOC, 6 Flute Cobalt Roughing Square End Mill - Uncoated, 4-1/2" OAL, 1-1/4" Shank Diam, Single End, 30° Helix - Caliber Tooling

Hertel - 1-1/4" Diam, Fine Pitch, 2" LOC, 6 Flute Cobalt Roughing Square End Mill - Uncoated, 4-1/2" OAL, 1-1/4" Shank Diam, Single End, 30° Helix


Item #: 84512052
Brand: Hertel
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Mill Diameter (Inch) 1-1/4
Mill Diameter (Decimal Inch) 1.2500
Number of Flutes 6
Pitch Fine
Length of Cut (Inch) 2
Length of Cut (Decimal Inch) 2.0000
Shank Diameter (Inch) 1-1/4
End Type Square End
Material Cobalt
Finish/Coating Uncoated
Overall Length (Inch) 4-1/2
Centercutting NonCenter Cutting
Helix Angle 30.00
Extended Reach No
Material Grade M42
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand

$97.90

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 1/2" Diam, Coarse Pitch, 5/8" LOC, 4 Flute Solid Carbide Roughing Square End Mill - AlTiN Finish, 2-1/2" OAL, 1/2" Shank Diam, Single End, Centercutting, 30° Helix - Caliber Tooling

Accupro - 1/2" Diam, Coarse Pitch, 5/8" LOC, 4 Flute Solid Carbide Roughing Square End Mill - AlTiN Finish, 2-1/2" OAL, 1/2" Shank Diam, Single End, Centercutting, 30° Helix


Item #: 35465970
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Aluminum titanium nitride (AlTiN) is one of the most abrasive resistant and hardest of the coatings. It is commonly used for machining aircraft and aerospace material, nickel alloy, stainless steel, titanium, cast iron and carbon steel.
Product Specifications
Mill Diameter (Inch) 1/2
Mill Diameter (Decimal Inch) 0.5000
Number of Flutes 4
Pitch Coarse
Length of Cut (Inch) 5/8
Length of Cut (Decimal Inch) 0.6250
Shank Diameter (Inch) 1/2
End Type Square End
Material Solid Carbide
Finish/Coating AlTiN
Overall Length (Inch) 2-1/2
Centercutting Center Cutting
Helix Angle 30.00
Extended Reach No
Material Grade Micrograin
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Stub
Overall Length (Decimal Inch) 2.5000
Chipbreaker Yes

$81.97

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Emuge - 6mm Diam, Fine Pitch, 13mm LOC, 4 Flute Solid Carbide 0.5mm Corner Radius Roughing End Mill - TiN/TiAlN Finish, 62mm OAL, 6mm Shank Diam, Single End, Extended Reach, 45° Helix - Caliber Tooling

Emuge - 6mm Diam, Fine Pitch, 13mm LOC, 4 Flute Solid Carbide 0.5mm Corner Radius Roughing End Mill - TiN/TiAlN Finish, 62mm OAL, 6mm Shank Diam, Single End, Extended Reach, 45° Helix


Item #: 47952353
Brand: Emuge
Model #: 2659TZ.006005
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
TiN/TiAlN s a multilayer coating that combines the high hardness of TiN and the heat resistance of TiAlN. It is commonly used on softer materials in general purpose applications.
Product Specifications
Mill Diameter (mm) 6.00
Number of Flutes 4
Pitch Fine
Length of Cut (mm) 13.00
Shank Diameter (mm) 6.00
End Type Corner Radius
Material Solid Carbide
Finish/Coating TiN/TiAlN
Overall Length (mm) 62.00
Centercutting NonCenter Cutting
Helix Angle 45.00
Extended Reach Yes
Corner Radius (mm) 0.50
Coolant Induced Yes
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Extra Long
Flute Type Spiral
Reach Length (mm) 25
Series/List 2659TZ
Additional Information Semi-Finished Fine Roughing Flute Profiles for Optimum Performance; Standard Corner Radius Design

$126.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Emuge - 6mm Diam, Fine Pitch, 13mm LOC, 4 Flute Solid Carbide 1mm Corner Radius Roughing End Mill - TiN/TiAlN Finish, 62mm OAL, 6mm Shank Diam, Single End, Extended Reach, 45° Helix - Caliber Tooling

Emuge - 6mm Diam, Fine Pitch, 13mm LOC, 4 Flute Solid Carbide 1mm Corner Radius Roughing End Mill - TiN/TiAlN Finish, 62mm OAL, 6mm Shank Diam, Single End, Extended Reach, 45° Helix


Item #: 47950050
Brand: Emuge
Model #: 2658TZ.006010
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
TiN/TiAlN s a multilayer coating that combines the high hardness of TiN and the heat resistance of TiAlN. It is commonly used on softer materials in general purpose applications.
Product Specifications
Mill Diameter (mm) 6.00
Number of Flutes 4
Pitch Fine
Length of Cut (mm) 13.00
Shank Diameter (mm) 6.00
End Type Corner Radius
Material Solid Carbide
Finish/Coating TiN/TiAlN
Overall Length (mm) 62.00
Centercutting NonCenter Cutting
Helix Angle 45.00
Extended Reach Yes
Corner Radius (mm) 1.00
Coolant Induced Yes
Single or Double End Single
Cutting Direction Right Hand
Flute Direction Right Hand
Length Type Extra Long
Flute Type Spiral
Reach Length (mm) 25
Series/List 2658TZ
Additional Information Semi-Finished Fine Roughing Flute Profiles for Optimum Performance; Standard Corner Radius Design

$126.33

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Accupro - 11/16" Diam, 1-1/2" LOC, 3 Flute Solid Carbide Ball End Mill - Uncoated, Single End, 4" OAL, 3/4" Shank Diam, Spiral Flute - Caliber Tooling

Accupro - 11/16" Diam, 1-1/2" LOC, 3 Flute Solid Carbide Ball End Mill - Uncoated, Single End, 4" OAL, 3/4" Shank Diam, Spiral Flute


Item #: 09492562
Brand: Accupro
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Product Specifications
Mill Diameter (Inch) 11/16
Mill Diameter (Decimal Inch) 0.6875
Number of Flutes 3
Length of Cut (Inch) 1-1/2
Length of Cut (Decimal Inch) 1.5000
Material Solid Carbide
Overall Length (Inch) 4
Shank Diameter (Inch) 3/4
Finish/Coating Uncoated
Single or Double End Single
Helix Angle 40.00
Extended Reach No
Material Grade Micrograin
Flute Type Spiral
Cutting Direction Right Hand
Flute Direction Right Hand

$137.05

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Hertel - 1-1/8", 1-5/8" LOC, 3/4" Shank Diam, 3-7/8" OAL, 2 Flute, Cobalt Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute - Caliber Tooling

Hertel - 1-1/8", 1-5/8" LOC, 3/4" Shank Diam, 3-7/8" OAL, 2 Flute, Cobalt Square End Mill - Single End, Uncoated, Spiral Flute, 30° Helix, Centercutting, Right Hand Cut, Right Hand Flute


Item #: 84512391
Brand: Hertel
Exact Tooling IR#: 04

Features and Benefits

Cobalt is harder than high speed steel and provides better wear resistance. It is commonly used on high tensile alloys.
Uncoated tools do not feature supportive treatments on the cutting edge. They are are used at reduced speeds for general applications on nonferrous metals.
Center Cutting tools have one or more cutting edges at the tip and are used in a variety of applications including plunging, drilling or ramping.
Product Specifications
Mill Diameter (Inch) 1-1/8
Mill Diameter (Decimal Inch) 1.1250
Number of Flutes 2
Length of Cut (Inch) 1-5/8
Length of Cut (Decimal Inch) 1.6250
Material Cobalt
Finish/Coating Uncoated
Shank Diameter (Inch) 3/4
Single or Double End Single
Overall Length (Inch) 3-7/8
Center Cutting Center Cutting
Flute Direction Right Hand
Cutting Direction Right Hand
Helix Angle 30.00
Flute Type Spiral
Length Type Regular
Material Grade M42
Chipbreaker No
Extended Reach No

$132.89

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

LMT - 3mm, 2 Flute, Single End, Solid Carbide, 0.3mm Corner Radius End Mill - 57mm OAL, 0° Helix, Right Hand Flute, 0.15mm LOC, Right Hand Cut, 12mm Extended Reach - Caliber Tooling

LMT - 3mm, 2 Flute, Single End, Solid Carbide, 0.3mm Corner Radius End Mill - 57mm OAL, 0° Helix, Right Hand Flute, 0.15mm LOC, Right Hand Cut, 12mm Extended Reach


Item #: 42715508
Brand: LMT
Model #: 1300999
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
AL2 Plus is TiAlN blended coating designed for high speed machining for its heat resistance and lubricity. It has a high hardness and works well on alloy and carbon steel, cast iron and stainless steel. AL2 Plus is proprietary coating of LMT.
Product Specifications
Mill Diameter (mm) 3.00
Mill Diameter (Decimal Inch) 0.1181
End Type Corner Radius
Corner Radius (mm) 0.300
Corner Radius (Decimal Inch) 0.0118
Number of Flutes 2
Material Solid Carbide
Finish/Coating TiAlN/Al2 Plus
Length of Cut (mm) 0.15
Length of Cut (Decimal Inch) 0.0059
Shank Diameter (mm) 6.00
Overall Length (mm) 57.00
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 0.00
Reach Length (mm) 12.00
Reach Length (Decimal Inch) 0.4724
Neck Diameter (mm) 2.50
Neck Diameter (Decimal Inch) 0.0984
Material Grade Fine Grain
Single or Double End Single
Length Type Stub
Centercutting Yes
Flute Direction Right Hand
Extended Reach Yes

$107.15

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It

Seco - 4mm, 3 Flute, Single End, Solid Carbide, 0.3mm Corner Radius End Mill - 50mm OAL, 40° Helix, Right Hand Flute, 5mm LOC, Right Hand Cut, 20mm Extended Reach - Caliber Tooling

Seco - 4mm, 3 Flute, Single End, Solid Carbide, 0.3mm Corner Radius End Mill - 50mm OAL, 40° Helix, Right Hand Flute, 5mm LOC, Right Hand Cut, 20mm Extended Reach


Item #: 48405831
Brand: Seco
Model #: 08387
Exact Tooling IR#: 04

Features and Benefits

Solid carbide provides better rigidity than high speed steel. It is extremely heat resistant and used for high speed applications on cast iron, nonferrous materials, plastics and other tough-to-machine materials.
Diamond is one of the hardest abrasive coatings. It is commonly used in grinding and polishing ceramic, stone and aluminum alloy.
Product Specifications
Mill Diameter (mm) 4.00
Mill Diameter (Decimal Inch) 0.1575
End Type Corner Radius
Corner Radius (mm) 0.300
Corner Radius (Decimal Inch) 0.0118
Number of Flutes 3
Material Solid Carbide
Finish/Coating Diamond
Length of Cut (mm) 5.00
Length of Cut (Decimal Inch) 0.1969
Shank Diameter (mm) 4.00
Overall Length (mm) 50.00
Flute Type Spiral
Cutting Direction Right Hand
Helix Angle 40.00
Reach Length (mm) 20.00
Reach Length (Decimal Inch) 0.7874
Single or Double End Single
Centercutting Yes
Flute Direction Right Hand
Mill Diameter Tolerance (mm) -0.02/-0.04
Corner Radius Tolerance (mm) +0.05/-0.05
Extended Reach Yes
TIR Maximum (Decimal Inch) 0.0004
TIR Maximum (mm) 0.01

$171.00

2% Off All Online Orders
Use Code: 2%OFF

Best Price Guarantee - Email Us A Better Published Price and We'll Beat It