Lighting & Electrical > Electrical Connectors (ET04) - (4391 Products)
Lighting & Electrical > Electrical Connectors (ET04)
SL-6NF ALUMA BURR
Item #: MW17310002517
Brand: Monster Tool Company
Model #: 310-002517
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Series/List # | 310 |
| Depth of Cut Maximum (APMX) | 1-5/16″ |
| PackSize | 1.00 |
| Flute Count (NOF) | Aluma Cut |
| Cutting Direction (HAND) | Right Hand |
| Overall Length (OAL) | 3-1/16″ |
| Decimal Equivalent | 0.625″ |
| Cutting Edge Material | Carbide |
| Point Angle (SIG) | 14 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Grade | C-2 Sub-Micron |
| Coating | Bright |
| Single / Double End | Single End |
| End Shape | Taper Radius |
| Length Group | Regular |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.020-4FL-SE-REG
Item #: MW21250100470
Brand: Monster Tool Company
Model #: 250-100470
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.02″ |
| Applicable Material | | Stainless Steel | Cast Iron | Super-Alloys / Titanium | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 0.06″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.02″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
NJ 103 SAWN T-Nut, 16MnCr5 Steel, M12 × 30 Thread Size, Black Oxide Finish
Item #: HF80146002
Brand: SCHUNK
Model #: 146002
| Product Specifications | |
|---|---|
| Type | Hardened, Ground |
| Height | 21.5 mm |
| Material | 16MnCr5 Steel |
| Finish | Black Oxide |
| Thread Size | M12 × 30 |
| Standard Pack | Each (1) |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2 CARB STUB DRILL AlTiN
Item #: MW23460105000B
Brand: Monster Tool Company
Model #: 460-105000B
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 1/2″ |
| Cutting Edge Material | Solid Tungsten Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 1/2″ |
| Tool Type | Drill |
| Decimal Equivalent | 0.5″ |
| Grade | C-2 Sub-Micron |
| Length Group | Short/Stub |
| Point Shape | Drill Point |
| Coating | TiAlN |
| Measurement Type | Inch |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Series/List # | 460 |
| Application | | Drilling | |
| Length Chip Flute (LCF) | 2-1/4″ |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Overall Length (OAL) | 3-3/4″ |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 135 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 2-1/4″ |
| Single / Double End | Single End |
| Flute Helix Angle (FHA) | 15 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4038 ST FL RHC REAMER
Item #: MW205000004038
Brand: Monster Tool Company
Model #: 500-0004038
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4038″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-1/4″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-1/4″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4038″ |
| Decimal Equivalent | 0.4038″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 3-1/2″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.4277 ST FL RHC REAMER
Item #: MW205000004277
Brand: Monster Tool Company
Model #: 500-0004277
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.4277″ |
| Coating | Bright |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials | |
| Cutting Edge Material | Solid Tungsten Carbide |
| Usable Length (LU) | 1-3/8″ |
| Measurement Type | Inch |
| Cutting Edge Length (L) | 1-3/8″ |
| Series/List # | 500 |
| Connection Diameter Machine Side (DCONMS) | 0.4277″ |
| Decimal Equivalent | 0.4277″ |
| Flute Count (NOF) | 6 |
| End Shape | 45° Chamfered End |
| Overall Length (OAL) | 4″ |
| Cutting Diameter Tolerance | +0.0003 / -0.0000 |
| Neck Length (LN) | 7/8″ |
| Single / Double End | Single End |
| Cutting Direction (HAND) | Right Hand |
| Length Group | Regular |
| Grade | C-2 Sub-Micron |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/8-4FL FUSION-STUB w/.090R
Item #: MW21284000565
Brand: Monster Tool Company
Model #: 284-000565
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/8″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 3/8″ |
| Corner Radius (RE) | 0.09″ |
| Depth of Cut Maximum (APMX) | 5/8″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 2-1/2″ |
| Length Group | Stub |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.375″ |
| Coating | Bright |
| Series/List # | 284 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | Variable |
| Single / Double End | Single End |
| End Shape | Corner Radius |
| Center Cutting | Yes |
| Applicable Material | | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/4-4FL-SE-STUB BN
Item #: MW21220001080
Brand: Monster Tool Company
Model #: 220-001080
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Application | | Profiling | Rampdown | Profile Cutting | Radiusing | Radius Slotting | |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Grade | C-2 Sub-Micron |
| Depth of Cut Maximum (APMX) | 1/2″ |
| Length Group | Stub |
| Overall Length (OAL) | 2″ |
| End Shape | Ballnose |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.25″ |
| Coating | Bright |
| Series/List # | 220 |
| Flute Count (NOF) | 4 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It