Hand Tools > Screwdrivers & Hex Keys (ET04) - (8707 Products)
Hand Tools > Screwdrivers & Hex Keys (ET04)
External Self-Locking Retaining Ring: 0.06" Groove Dia, 1/2" Shaft Dia, 15-7 Grade 632 Stainless Steel
Item #: 14386460
Brand: Rotor Clip
Model #: TY-50SSProduct Specifications
Ring Type
Self-Locking
Shaft Diameter (Inch)
1/2
Groove Diameter (Decimal Inch)
0.0600
Material
Stainless Steel
Free Diameter (Decimal Inch)
0.4980
Free Outside Diameter (Decimal Inch)
0.5020
Military Specification
Does Not Meet Military Specifications
Material Grade
15-7 Grade 632
Standards
ISO 13485.2016
Ring Thickness (Decimal Inch)
0.0150
Ring Thickness Tolerance (Decimal Inch)
-0.0020 to 0.0020
Thrust Load Capacity
50
Minimum Shaft Diameter (mm)
12.70
Minimum Shaft Diameter (Decimal Inch)
0.4980
Maximum Shaft Diameter (mm)
12.70
Maximum Shaft Diameter (Decimal Inch)
0.5020
Outside Diameter Tolerance (Decimal Inch)
-0.0050 to 0.0050
UNSPSC Code
31163202
Manufacturer's Part Number
TY-50SS
System Of Measurement
Inch
Finish Coating
Bright/Uncoated
Number Of Prongs
6
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.019-2FL-SE-REG
Item #: MW21250200240
Brand: Monster Tool Company
Model #: 250-200240
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.019″ |
| Applicable Material | | Stainless Steel | Cast Iron | Aluminum / Non-Ferrous Materials | |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Application | | Slotting | Profiling | Plunging | |
| Depth of Cut Maximum (APMX) | 0.057″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 1-1/2″ |
| Length Group | Regular |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.019″ |
| Coating | Bright |
| Series/List # | 250 |
| Flute Count (NOF) | 2 |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 30 Degrees |
| Single / Double End | Single End |
| End Shape | Square |
| Center Cutting | Yes |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ballnose End Mill; 0.035″ Dia. × 0.105″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 FL, Carbide, AlTiN
Item #: TA15TC58761
Brand: Titan USA
Model #: TC58761
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.035″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Connection Diameter Machine Side (DCONMS) | 1/8″ |
| Usable Length (LU) | 0.42″ |
| Depth of Cut Maximum (APMX) | 0.105″ |
| Corner Radius (RE) | 0.0175″ |
| Overall Length (OAL) | 2-1/2″ |
| End Shape | Ball |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
| Coating | TiAlN |
| Center Cutting | Yes |
| Flute Count (NOF) | 3 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It