BES Up To 2022 $250-$5000 Products - (161414 Products)
12X1-1/4X3 32AR46-IV40 CARBO
Item #: MG3762221
Manufacturer: Carborundum
Mfg #: 0553956222
Technical Specifications:
*Brand Name: Carborundum
Description:
Shipping Info:
*Actual Weight - 1.5000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5" 1.1/2-8 THREADED ZERO SET ADPT
Item #: HK16TH903
Manufacturer: BTC
Mfg #: TH903
Technical Specifications:
*Brand Name: BTC
Description:
*Steel Adapter Plates for Adjustable Chucks
*Fully Finished Precision Steel Adapters, No Machining Required
*Generic USA machined to fit Bison or Rapidhold
*Rapidhold & Bison adapters are interchangeable
*BTC adapters for BTC, Buck and PBA Chucks
*BPA adapters for PBA Setrite and Atlas easy set chucks
Shipping Info:
*Actual Weight - 60.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 3/16 x 4 - Oil Hardening Flat Stock
Item #: LY4054348
Manufacturer: Starrett
Mfg #: 54348
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 3/16
*Width: 4
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 7.7300
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/16 x 3-1/2 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8054958
Manufacturer: Starrett
Mfg #: 54958
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 5/16
*Width: 3-1/2
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 7.4400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 3/32 x 3 - Air Hardening Flat Stock
Item #: LY4557317
Manufacturer: Starrett
Mfg #: 57317
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 3/32
*Width: 3
Description:
*A-2 Air Hardening Ground Flat Stock 36" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 2.9000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 1/2 x 5 - Oversize Air Hardening Flat Stock
Item #: LY703213
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: A-2
*Thick: 1/2
*Width: 5
Description:
*Oversize A-2 Air Hardening Ground Flat Stock
Shipping Info:
*Actual Weight - 13.2400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1 x 1 x 18 - Air Hardening Flat Stock
Item #: LY4554787
Manufacturer: Starrett
Mfg #: 54787
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 1
*Width: 1
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 5.1000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2-13 x 3-3/4 - Zinc / Yellow Plated Heat Treated Alloy Steel - Cap Screws - Hex
Item #: SN7830665
Manufacturer: Titan
Mfg #: JKR08120
Technical Specifications:
*Box Qty.: 25
*Brand Name: Titan
*Coating: Zinc / Yellow Plated
*Grade: 8
*Length: 3-3/4
*Material: Heat Treated Alloy Steel
*Screw Style: Cap Screws - Hex
*Size: 1/2-13
*Thread: Coarse
Description:
*Grade 8 hex head cap screws are designed for use in areas where there is high stress, and need for extra strength
*Used with grade 8 nuts to give you the reliability and assurance that you need
*The zinc and yellow plating offers a greater degree resistance than standard zinc, and its bright yellow plating will differentiate itself from our grade 5 hex cap screws
Shipping Info:
*Actual Weight - .0120
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
9/16-18X2-1/2 HEX CAP GR 5 ZINC(25)
Item #: SN7520715
Manufacturer: Titan
Mfg #: JTR09080
Technical Specifications:
*Brand Name: Titan
Description:
Shipping Info:
*Actual Weight - .0130
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4-10 - Stainless Steel - Finished Hex Nut
Item #: SN7250345
Manufacturer: Titan
Mfg #: SSU12
Technical Specifications:
*Box Qty.: 25
*Brand Name: Titan
*Coating: Stainless Steel
*Nut Style: Finished Hex
*Size: 3/4-10
*Thread: Coarse
Description:
*A six sided internally threaded fastener which is both thicker and wider than a same-sized finished hex nut, made of 18-8 stainless steel
*Nuts size 7/16" and smaller shall be double chamfered
*Larger sizes are either double chamfered or chamfered on top with a washer faced bearing surface.
*The strongest of all the 18-8 nuts because of its greater thread length and greater resistance to dilation (widening or stretching)
*Price per 100
*Sold in Box Quantity
Shipping Info:
*Actual Weight - .0150
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
M8 Dia. - 70 Length - Standard Dowel Pin
Item #: SM5060345
Manufacturer: Brighton Best
Mfg #: 536132
Technical Specifications:
*Box Qty.: 100
*Brand Name: Brighton Best
*Diameter: M8
*Length: 70
*Material: Heat Treated Alloy Steel
*Pin Style: Standard
Description:
*Metric Dowel Pins
*A solid headless straight pin with a closely controlled diameter
*One end is chamfered with the other end radiused to form a crown.
*Precise tolerances of dowel pins make them excellent for achieving proper alignment of parts in high-speed assemblies
*DiN 6325
*Heat treated to RC 60 min. - surface
*RC 47-58 - core
*World Class Quality
Shipping Info:
*Actual Weight - .0210
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/2-13 CLAMPING KIT
Item #: SG5020506
Manufacturer:
Mfg #:
Technical Specifications:
Description:
Shipping Info:
*Actual Weight - 22.0780
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
MDW1510GS2 15.1 mm Dia. × 16 mm Shank × 53 mm Flute Length × 112 mm OAL, DEX, External Coolant, Cylindrical Solid Carbide Drill
Item #: FJ065UHY132
Brand: Sumitomo
Model #: 5UHY132
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 15.1 mm |
| Shape | Solid Carbide |
| Decimal Equivalent | 0.5945″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 15.1 mm |
| Tool Type | Solid Carbide |
| Coating | DEX |
| Point Shape | 135 Degrees |
| Connection Diameter Machine Side (DCONMS) | 16 mm |
| Measurement Type | Metric |
| Coolant Supply Property (CSP) | External |
| Length Chip Flute (LCF) | 53 mm |
| Shank Type | Cylindrical |
| Overall Length (OAL) | 112 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1-1/4″ × 1-1/4″ × 2″ × 4-1/2″ RHS / RHC HSS-CO 8% (M42) Cobalt, Single End, 6-Flute, Center Cutting End Mill - Bright
Item #: CE60C42719
Brand: Cleveland
Model #: C42719
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1-1/4″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 1-1/4″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 2″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 4-1/2″ |
| Decimal Equivalent | 1.25″ |
| Cutting Edge Material | HSS-CO 8% (M42) |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | HGC-4C |
| Flute Count (NOF) | 6 |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | Weldon |
| Single / Double End | Single End |
| End Shape | Square |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
MDW1460GS2 14.6 mm Dia. × 15 mm Shank × 53 mm Flute Length × 108 mm OAL, DEX, External Coolant, Cylindrical Solid Carbide Drill
Item #: FJ065UHY127
Brand: Sumitomo
Model #: 5UHY127
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 14.6 mm |
| Shape | Solid Carbide |
| Decimal Equivalent | 0.5748″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 14.6 mm |
| Tool Type | Solid Carbide |
| Coating | DEX |
| Point Shape | 135 Degrees |
| Connection Diameter Machine Side (DCONMS) | 15 mm |
| Measurement Type | Metric |
| Coolant Supply Property (CSP) | External |
| Length Chip Flute (LCF) | 53 mm |
| Shank Type | Cylindrical |
| Overall Length (OAL) | 108 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1″ × 3/4″ × 1-1/2″ × 3-3/4″ RHS / RHC HSS-CO 8% (M42) Cobalt Extra Coarse Roughing End Mill-3F SE CC - Bright
Item #: CE60C30791
Brand: Cleveland
Model #: C30791
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Applicable Material | Aluminum / Non-Ferrous Materials |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Application | Roughing |
| Depth of Cut Maximum (APMX) | 1-1/2″ |
| Tool Type | End Mill |
| Overall Length (OAL) | 3-3/4″ |
| Flute Type | Spiral | Extra Coarse |
| Cutting Edge Material | HSS-CO 8% (M42) |
| Decimal Equivalent | 1″ |
| Coating | Bright |
| Measurement Type | Inch |
| Flute Count (NOF) | 3 |
| Series/List # | RG9 |
| Shank Type | Weldon |
| Cutting Direction (HAND) | Right Hand |
| End Shape | Square |
| Single / Double End | Single End |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
MDW1540GS2 15.4 mm Dia. × 16 mm Shank × 53 mm Flute Length × 112 mm OAL, DEX, External Coolant, Cylindrical Solid Carbide Drill
Item #: 36960375
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-1.7727MProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00002/-0.00002
Blank Number Wire Size
#6
Inner Diameter (Decimal Inch)
1.7727
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Precision Cutting Tools 345 SERIES 3 FLUTE FINISHER FOR ALUMINUM & NON FERROUS MATERIALS
Item #: CW8056117
Brand: Precision Cutting Tools
Model #: 9581444
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Neck Diameter (DN) | 0.725 |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Peripheral Effective Cutting Edge Count (ZEFP) | 3 |
| Depth of Cut Maximum (APMX) | 1-1/4″ |
| Tool Type | Solid Carbide Endmill |
| Overall Length (OAL) | 4″ |
| Maximum Feed per Tooth (fz(max)) | 0.008 ″/tooth |
| Cutting Edge Material | Carbide |
| Minimum Feed per Tooth (fz(min)) | 0.003 ″/tooth |
| Coating | Ta-C |
| Length Group | Stub - Necked |
| Flute Count (NOF) | 3 |
| Shank Standard | h6 |
| Flute Helix Angle (FHA) | 45 Degrees |
| Body Material | Carbide |
| Shank Type | Round |
| Style | Necked |
| End Shape | Corner Radius |
| Decimal Equivalent | 0.75″ |
| Usable Length (LU) | 2″ |
| Measurement Type | Inch |
| Application | | Finish | HEM | Semi Finish | |
| Series/List # | 345 |
| Corner Radius (RE) | 0.015″ |
| Shank Size (SS) | 3/4″ |
| Grade | A5005 Exxtral Carbon (DLC) |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
MDW1480GS2 14.8 mm Dia. × 15 mm Shank × 53 mm Flute Length × 108 mm OAL, DEX, External Coolant, Cylindrical Solid Carbide Drill
Item #: FJ065UHY129
Brand: Sumitomo
Model #: 5UHY129
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 14.8 mm |
| Shape | Solid Carbide |
| Decimal Equivalent | 0.5827″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 14.8 mm |
| Tool Type | Solid Carbide |
| Coating | DEX |
| Point Shape | 135 Degrees |
| Connection Diameter Machine Side (DCONMS) | 15 mm |
| Measurement Type | Metric |
| Coolant Supply Property (CSP) | External |
| Length Chip Flute (LCF) | 53 mm |
| Shank Type | Cylindrical |
| Overall Length (OAL) | 108 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8 End Mill 5FL .060R TA - V-CARB 5/8x5/8x1-5/8x3-1/2
Item #: DD9232581
Brand: KYOCERA SGS Precision Tools
Model #: 32581
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/8″ |
| Shank Type | Round |
| Connection Diameter Machine Side (DCONMS) | 5/8″ |
| End Shape | Corner Radius |
| Depth of Cut Maximum (APMX) | 1-5/8″ |
| Usable Length (LU) | 1-7/8″ |
| Overall Length (OAL) | 3-1/2″ |
| Corner Radius (RE) | 0.06″ |
| Cutting Edge Material | Carbide |
| Flute Type | Spiral |
| Coating | TA |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 5 |
| Decimal Equivalent | 0.625″ |
| Flute Helix Angle (FHA) | 45 Degrees |
| Series/List # | V-CARB |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It